44
Conference Calls
While you are talking with an outside caller, you can call the handset or the base
unit to make a conference call. When the system has two or more handsets (p. 3),
you can make a conference call with your handset and another handset.
• To leave the conference, press [OFF] on the handset or press [DIGITAL SP-
PHONE] on the base unit. The two other parties can continue the conversation.
• During a conference, the outside call can be placed on hold by pressing [HOLD]
(INTERCOM) on the handset or [HOLD] on the base unit.
Internal communications between extensions are not suspended. Only the person
who placed the call on hold can resume the full conference; press
[CONF/FUNCTION] on the handset or press [CONF] on the base unit.
• Two more extensions can join the conference call if all other extensions are not
being used. To join the conference call, press [], [] or [DIGITAL SP-PHONE].
A maximum of five parties including the outside party can take part in a
conference call.
Call Share
This feature allows the base unit or the handset to join the existing external call.
To join a conversation (Call Share)
Handset: Press [] or [].
Base unit: Press [DIGITAL SP-PHONE].
•“Conference” is displayed.
• A maximum of five parties including the outside party can join a conversation if all
other extensions are not being used.
1 During a call, press [HOLD]
(INTERCOM).
• The call is put on hold.
2 To page the base unit, press
[0].
To page another handset,
press the extension number
([1] to [8]).
3 When the paged party
answers, press [CONF/
FUNCTION] on your unit to
make a conference call.
1 During a call, press
[LOCATOR/INTERCOM/
TRANSFER].
• The call is put on hold.
2 To page the handset, press
the extension number ([1] to
[8]).
3 When the paged party
answers, press [CONF] on
your unit to make a
conference call.
To Next Page
Loading...
