51
Mailbox Features
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Setting the Mailbox Password (for Mailbox 2 and 3)
You can use Mailbox 2 or 3 for your personal mailbox, and prevent unauthorized
people from accessing your mailbox and listening to your messages. Assign a
2-digit password (00–99) to Mailbox 2 or 3. Each password and the remote code
(p. 59) must be unique. Once a password is assigned to Mailbox 2 or 3, no one can
listen to messages without entering the password.
To check the password, repeat steps 1 to 5.
• The password is displayed. When finished, press [STOP].
To erase the password
Press [ERASE] in step 6, press [] (Save), then press [STOP].
• You can access the mailbox without entering the password.
1 Press [FUNCTION/EDIT].
2 Scroll to “Initial setting” by pressing
[] or [], then press
[]
.
3 Scroll to “Set answering” by pressing []
or [], then press
[]
.
4 Scroll to “Set mailbox2&3” by pressing
[] or [], then press
[]
.
5 Select the mailbox by pressing [] (Mailbox
2) or [] (Mailbox 3).
6 Enter a 2-digit password (00–99).
• If you entered a wrong number, press [ERASE]
and enter the password again.
7 Press [] (Save).
• If 3 beeps sound, you entered the same password as the other mailbox or
the remote code (p. 59) or the entered password was one-digit. Start again
from step 6 and select another password.
8 Press [STOP].
Base Unit
▼
To Next Page
Loading...
