Useful Information
48
Making/answering calls, intercom
*1 KX-TG6031/KX-TG6032/KX-TG6033/KX-TG6034/KX-TG6051/KX-TG6052/
KX-TG6053
Problem Cause/solution
Static is heard, sound cuts
in and out. Interference
from other electrical units.
LMove the handset and base unit away from
other electrical appliances.
LMove closer to the base unit.
LTurn on the clarity booster feature (page 19).
LIf your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
The handset does not ring. LThe ringer volume is turned off. Adjust it (page
30).
The base unit does not
ring.
*1
LThe ringer volume is turned off. Adjust it (page
18).
I cannot make a call. LThe dialing mode may be set incorrectly.
Change the setting (page 15).
LAnother handset is in use. Try again later.
I cannot have a
conversation using the
headset.
LMake sure that an optional headset is
connected properly (page 44).
LIf “SP-phone” is displayed on the handset,
press {C} to switch to the headset.
I cannot make long
distance calls.
LMake sure that you have long distance service.
I cannot page the handset. LThe called handset is too far from the base unit.
LThe called handset is in use. Try again later.
I cannot page the base
unit.
*1
LThe base unit is in use. Try again later.
The Slow Talk feature does
not work.
*1
LIf you are on a conference call, you cannot use
the Slow Talk feature.
TG602X_603X_605XC(e).book Page 48 Tuesday, December 26, 2006 1:55 PM
To Next Page
Loading...
