Programming
18
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 18)
– using the direct commands (page 20)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
8
2 Press {V} or {^} to select the desired main menu. i M
3 Press {V} or {^} to select the desired item in sub-menu 1. i M
L In some cases, you may need to select from sub-menu 2. i M
4 Press {V} or {^} to select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L See page 20 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller List
\
––27
Answer System
e
Play New Msg. –30
Play All Msg. –30
Erase All Msg.
*1
–31
Greeting Start REC
*1
29
Play Greeting 29
Default
*1
29
Settings Number of Rings
*1
32
Recording Time
*1
33
Remote Code
*1
31
Call Screening 28
Answer On
*1
–28
Answer Off
*1
–28
Time Settings
e
Set Date/Time
*1
–13
Alarm –23
Time Adjustment
*1
––
Intercom
4
––35
TG6521AL(e).book Page 18 Friday, February 26, 2010 5:07 PM
To Next Page
Loading...
