Getting Started
8
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PQLV219AL.
■ Base unit
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
■ Charger
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
the charge indicator goes off and
“Fully charged” is displayed.
(220-240 V AC,
50/60 Hz)
Hook
“Click”
Press plug firmly.
Use only the supplied
telephone line cord.
Correct Wrong
To socket
DSL/ADSL filter*
“Click”
(220-240 V AC,
50/60 Hz)
Hooks
L When the language selection is
displayed, see page 12.
Rechargeable Ni-MH ONLY
Confirm “Charging” is displayed.
Charge indicator
TG6521AL(e).book Page 8 Friday, February 26, 2010 5:07 PM
To Next Page
Loading...
