Useful Information
44
Liquid damage
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
Wall mounting
Note:
L Make sure that the wall is strong enough to support the weight of the unit.
Wall mounting template
Problem Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least
3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and
charge fully before use. If the unit does not
work properly, contact an authorised service
centre.
■ Base unit ■ Charger
■ Base unit ■ Charger
Hook
Screws
(Not supplied)
57 mm
Hooks
25 mm
Screws
(Not supplied)
57 mm
25 mm
TG6521AL(e).book Page 44 Friday, February 26, 2010 5:07 PM
To Next Page
Loading...
