Useful Information
42
Caller ID
Problem Cause/solution
Caller information is not
displayed.
L You must subscribe to a Caller ID service.
Contact your service provider/telephone
company for details.
L If your unit is connected to any additional
telephone equipment, remove and plug the
unit directly into the wall socket.
L If you use a DSL/ADSL service, we
recommend connecting a filter (contact your
DSL/ADSL service provider) to the telephone
line between the base unit and the telephone
line socket. Contact your DSL/ADSL provider
for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
Caller information is slow to
display.
L Depending on your service provider/
telephone company, the unit may display the
caller’s information at the 2nd ring or later.
L Move closer to the base unit.
Time on the unit has shifted. L Incorrect time information from incoming
Caller ID changes the time. Set the time
adjustment to “Manual” (off) (page 20).
The name stored in the
phonebook is not fully
displayed while an outside call
is being received.
L Edit the phonebook entry name to fit in 1 line
of text (page 16).
TG6521AL(e).book Page 42 Friday, February 26, 2010 5:07 PM
To Next Page
Loading...
