Panasonic KX-TGF310CX - Getting Started; Setting Up Connections; Handset Battery Installation

Setting up
Connections
n
B
a
se unit
Connect the AC adaptor to the unit by
pre
ssing the plug firmly.
Connect the telephone line cord to the unit
unt
il you hear a click.
Fasten the AC adaptor cord and the telephone
lin
e cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord to the
tel
ephone line jack until you hear a click.
A DSL/ADSL filter (not supplied) is required if
you
have a DSL/ADSL service.
Connect the corded handset cord to the
cor
ded handset and the base unit until you
hear a click.
7
7
1
4
6 5
1
2
3 3
3
Note:
R U
s
e
only the supplied Panasonic AC adaptor
PNLV226BX.
R Use only the supplied telephone line cord.
R Follow the directions on the display to set up
th
e unit.
n Charger
Connect the AC adaptor plug to the unit until
you
hear a click.
Connect the AC adaptor to the power outlet.
1
2
Note:
R Use
only the supplied Panasonic AC adaptor
PNLV233BX.
Handset battery installation
R USE
ONLY rechargeable Ni-MH batteries AAA
(R03) size (
1
).
R Do
NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
1
R Follow the directions on the display to set up
th
e unit.
8
Getting Started
KX-TGF310_320CX(en)_0429_OI.pdf 8 4/29/2015 4:08:39 PM