Panasonic KX-TGP600 - Page 108

6. Repeat steps 4 and 5 to add additional phone number types.
7. [ ]/[ ]: "Category Off"
OK
8. Select a category.
OK
9. To select a default number for the entry, press [ ] or [ ] to select "Default TEL No".
OK
10. [ ]/[ ]: Select the number to use as the default number.
OK
11.
SAVE
/
Save
Note
• Steps 7 and 8 can be omitted if you do not want to assign a category.
• Steps 9 and 10 can be omitted if you do not want to assign a default number. (The
first number entered for an entry will automatically be assigned as the default
number.)
• The valid digits are "0" through "9", " ", " ", " ", "P".
To enter " " or "P", see 3 Making Calls, page 85.
• If an item with the same name and number exists, the new information added will be
merged with the existing item.
• To enter characters, see 2.11 Entering Characters, page 82.
Storing an Item Using the Dialing
You can dial a number first and then add it as a phonebook entry.
[In standby mode]
1. Dial a number.
2.
3. Enter a name (max. 24 characters).
OK
4. [ ]/[ ]: Select a phone number type ( to ).
OK
5. Edit the phone number if desired.
OK
6. Repeat steps 4 and 5 to add additional phone number types.
7. [ ]/[ ]: "Category Off"
OK
8. Select a category.
OK
9. To select a default number for the entry, press [ ] or [ ] to select "Default TEL No".
OK
10. [ ]/[ ]: Select the number to use as the default number.
OK
7.2.2 Storing an Item in the Handset Phonebook
108