Panasonic KX-TGP600 - 10.1.4 System Settings (KX-TGP600): Status Information

10.1.4 System Setting Menu Layout (when connected to the KX-TGP600)
Status
Sub Item Description Setting Default
Line Status Displays the line status.
Registered
*1
/
Registering
*1
/(NULL)
—
Firmware
Version
Selects which is shown
on the display the model
number and the firmware
version.
–Base Station
–Handset
—
IP Mode Displays the IP network
mode.
IPv4/IPv6/IPv4&IPv6 —
IPv4 Settings Displays the information
about IPv4 settings.
–IP Address
*2
–Subnet Mask
*2
–Default Gateway
*2
–DNS
*2
—
IPv6 Settings Displays the information
about IPv6 settings.
–IP Address
*3
–Prefix
*3
–Default Gateway
*3
–DNS
*3
—
MAC Address Displays the MAC
address of the base unit.
— —
LLDP Displays the LLDP
status.
On/Off —
CDP Displays the CDP status. On/Off —
VLAN Displays the VLAN ID
and priority.
— —
*1
If you select this item and press
OK
, the phone number of the selected line is
displayed.
*2
If this item is not set, "0.0.0.0" is displayed. If the base unit does not connect to the
Ethernet, "…" is displayed.
*3
If this item is not set, "0::0" is displayed. If the base unit does not connect to the
Ethernet, "::" is displayed.
10.1.4 System Setting Menu Layout (when connected to the KX-TGP600)
159