3 Making Calls
3.1 Making Calls
• To enter characters, see 2.11 Entering Characters, page 82.
• You can confirm that the number was dialed correctly before calling (Predialing) by
entering the number, then
KX-TPA60:
Press
.
KX-TPA65/KX-TPA68:
Off-hook
• To clear an entire number while predialing,
KX-TPA60:
Press / /[XFER/CLR] for more than 1 second.
KX-TPA65:
Press / /[TRANSFER/CLEAR] for more than 1 second.
KX-TPA68:
Press and hold
for more than 1 second.
• To cancel dialing, press
KX-TPA60:
KX-TPA65:
/[CANCEL]
KX-TPA68:
[CANCEL]
• If flashes, move closer to the base unit and dial again.
• The "+" symbol (international dialing code) can be entered by pressing and holding the
" " key.
• To insert "P" symbol (3 second pause) between phone numbers, press
/
*1
.
It is useful when you want to operate voice mail service without listening to pre-
recorded announcement, for example. Repeat as needed to create longer pauses.
*1
This soft key is displayed only when configured on the telephone. Contact your
administrator for further information.
3.2 Basic Calling
3.2.1 Calling by Dialing
1. KX-TPA60:
3 Making Calls
85
To Next Page
Loading...
