Panasonic KX-TGP600 - 2.7 Parallel Mode (KX-TPA65;KX-TPA68)

Deleting the Outgoing Call Log
[When the Outgoing Call Log is displayed]
1. [ ]/[ ]/[ ]
*1
/[ ]
*1
: Select the desired item. /
MENU
/
2. [ ]/[ ]: "Delete"
*2
OK
3. [ ]/[ ]: "Yes"
OK
To delete other items, go back to Step 1.
*1
KX-TPA68 only.
*2
You can select "Delete All" instead to delete all items.
2.7 Parallel Mode (KX-TPA65/KX-TPA68)
By using a desk phone as a master desk phone (KX-TPA65/KX-TPA68), a handset
(KX-TPA60) can be set to be paired with it so that the phone number (account) of the
master desk phone is applied to the slave (paired) handset. With pairing settings, the
desk phone can be used while you are sitting at your desk, and the slave handset can be
used while away from your desk.
KX-TPA65/KX-TPA68:
[In standby mode]
1.
/
MENU
/
2. KX-TPA65:
[ ]/[ ]/[ ]/[ ]:
OK
KX-TPA68:
[
]/[ ]: "System Settings"
OK
3. [ ]/[ ]: "System Settings"
*1
OK
4. [ ]/[ ]: "Parallel Setting"
OK
5. [ ]/[ ]: Select the desk phone (KX-TPA65/KX-TPA68) to use as the master unit.
OK
6. [ ]/[ ]: "Pairing"
OK
7. [ ]/[ ]: Select the handset (KX-TPA60) to use as the paired unit.
• To cancel pairing: "Off"
OK
8. [ ]/[ ]: "Mode"
OK
9. [To make one unit receive a busy signal while the other is on a call]
[ ]/[ ]: "Busy"
OK
[To make one unit take over a call when the other is on a call]
[ ]/[ ]: "Take Over Call"
OK
2.7 Parallel Mode (KX-TPA65/KX-TPA68)
79