Panasonic KX-TGP600 - 9.2.4 Wall Mounting

9.2.4 Wall Mounting
Note
• Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
KX-TGP600 (Base unit)
1. Drive the screws into the wall either 55 mm (2 5/32 in) apart, and mount the unit on
the wall.
*2
*1
*3
*1
55 mm (2 5/32 in)
*2
Washer
*3
Drive the screw to this point.
KX-TPA65/KX-TPA68 (Desk phone)
1. Connect the handset cord.
2. Insert the tabs of the wall mounting adaptor into the designated openings in the
base, and then slide the wall mounting adaptor in the direction of the arrow until it
clicks.
KX-TPA65
9.2.4 Wall Mounting
134