Panasonic KX-TGP600 - 2.12 Power On;Off (KX-TPA60 only); 2.13 Power Save Mode (KX-TPA60 only); 2.14 Basic Operation: Going off- and on-hook

• To enter a character located on the same dialing key as the previous character, move
the cursor by pressing the Navigator Key [ ], then enter the desired character.
• To edit an entered character
1. Press [ ] or [ ] to highlight the character.
2. Delete the character.
KX-TPA60:
/ /[XFER/CLR]
KX-TPA65:
/ /[TRANSFER/CLEAR]
KX-TPA68:
Clear
3. Enter the correct character.
• To clear an entire line.
KX-TPA60:
/ /[XFER/CLR]
KX-TPA65:
Press and hold / /[TRANSFER/CLEAR] for more than 1 second.
KX-TPA68:
Press and hold
Clear
for more than 1 second.
• To move the cursor, press the Navigator Key [ ], [ ], [ ] or [ ].
2.12 Power On/Off (KX-TPA60 only)
To turn the power of the handset on or off, press and hold
.
2.13 Power Save Mode (KX-TPA60 only)
Power Save Mode turns off the ringer, LCD backlight, and/or key backlight automatically
after a set number of seconds have passed while receiving a call. For details about
adjusting power save mode settings, see Incoming Option, page 148.
2.14 Basic Operation
Basic operations for the KX-TPA65/KX-TPA68 are described here.
Going off- and on-hook
There are several ways to go off-hook and on-hook:
• Using the corded handset
• Using the
/[SP-PHONE], /[SP-PHONE/HEADSET], or /[CANCEL] key
• Using the soft key
2.12 Power On/Off (KX-TPA60 only)
83