Panasonic KX-TGP600 - 9 Installation and Setup; 9.1 Installation and Setup

9 Installation and Setup
9.1 Installation and Setup
Note
• Panasonic assumes no responsibility for injuries or property damage resulting from
failures arising out of improper installation or operation inconsistent with this
documentation.
WARNING
• To reduce the risk of fire or electric shock, do not overload AC outlets and extension
cords.
• Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may
cause electric shock and/or excessive heat resulting in a fire.
• Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
9.1.1 Attaching the Stand (KX-TPA65/KX-TPA68)
Attach the stand to the desk phone.
1. Insert the stand into the hooks located in the unit.
2. Gently rotate the stand in the direction indicated until it becomes fixed in the desired
position.
Example: KX-TPA65
9.1.2 Adjusting the Stand Position (KX-TPA65/KX-TPA68)
Push the PUSH marks in the direction indicated, with both hands, and tilt the stand until
it becomes fixed in the desired position.
• High Position → Low Position
9 Installation and Setup
128