Off-hook: Answer the page.
4.5 Silent Mode
Silent Mode turns off the ringer when calls are received. This can be useful in situations
where you do not want to be disturbed, such as during a meeting.
When Silent Mode is active, the following features are turned off or set as specified
automatically, regardless of their settings.
–Ringer Volume
–Ring On Charger
*1
–Auto Answer
–Key Tone
*1
KX-TPA60 only.
Note
• When Silent Mode is set, the Low Battery Alarm will not be heard in standby mode.
• When Silent Mode is set, confirmation tones for setting the ring pattern or ring
volume will not play.
To set or cancel
1. KX-TPA60:
Press and hold
for more than 2 seconds.
KX-TPA65/KX-TPA68:
Press and hold for more than 2 seconds.
4.6 Noise Reduction/Voice Clarity (KX-TPA60/KX-TPA68)
When Noise Reduction is enabled, environmental noise is reduced to improve and
maintain sound quality for the other party in the conversation. Receiver volume is also
increased according to the level of environmental noise. It is useful in noisy
environments such as warehouses, manufacturing plants, restaurants, and garages.
Noise Reduction can be enabled by default for regular use, or toggled on/off during a
call.
Note
• Noise Reduction can be used only in receiver mode or with a headset. It cannot be
used in Hands-free mode.
• During a conversation in Noise Reduction mode, either the
/
soft key will
blink, or "Noise Reduction" will be displayed on the LCD.
• During a conversation with a headset in default Noise Reduction mode, even if you
disconnect the headset from the handset, Noise Reduction mode will continue.
4.5 Silent Mode
95
To Next Page
Loading...
