Panasonic KX-TVA200 - Page 141

3. Click Yes.
[Editing a Caller ID No.]
1. Select the desired Caller ID number.
2. Click Edit....
3. Edit parameters in the Caller Information dialog box.
4. Click OK.
[Recording the Caller’s Name in the Caller Information dialog box]
1. Select the desired Caller ID number and click Edit....
• Before you can record, confirm that you have clicked "Apply" since you added the Caller ID No.
2. Select "Record from extension" or "Import from recorded file".
When "Record from extension" is selected
1. Specify the extension number of the telephone used for recording, then click Connect.
2. When the specified extension rings, go off-hook.
3. Click
(record), (stop), or (play) to record or play a voice label
through the extension.
4. Click Disconnect.
5. Click OK.
When "Import from recorded file" is selected
1. Click the folder icon.
The Open dialog box appears.
2. Navigate to the folder containing the WAV files you want to open.
(WAV files must meet the following specifications: IMA ADPCM codec, 8.000 kHz, 4 bit, mono.)
3. Select a file to import.
4. Click Open to import the file.
3. Click OK.
Caller-ID No.
Assigns the telephone number for which the VPS announces the prerecorded caller name to extension users.
Default
None
Value Range
Max. 20 digits consisting of 0–9
Feature Manual References
2.2.11 Caller Name Announcement—System (APT/DPT Integration Only)
Description
Enters a name and/or description of the Caller ID number.
Default
None
Value Range
Max. 20 characters
Document Version 3.0 2010/06 Programming Manual 141
2.5.3 System Caller Name Announcement