Prompt Mode
When an external message is delivered, the receiver will be greeted by the VPS in the specified language. If
set to "Primary", the default language will be used. If set to "Selective", the receiver has a choice of prompts.
See related explanation in "Incoming Call Service Prompt" in 2.3.1.1 Call Service.
Note
• If set to "Selective" and the receiver uses a rotary telephone, the no-entry selection is specified by
"Prompt for Rotary Callers" in 2.3.1.1 Call Service.
Default
Primary
Value Range
Primary, Selective, Selection from all installed languages (KX-TVA50: 3 languages, KX-TVA200: 10
languages)
Programming Manual References
"Incoming Call Service Prompt" in 2.3.1.1 Call Service
Feature Manual References
2.2.45 System Prompts
Document Version 3.0 2010/06 Programming Manual 63
2.1.5 External Message Delivery
To Next Page
Loading...
