2.4 Service Settings
Programming Manual 97
Menu Repeat Cycle
Specifies the number of times the Custom Service menu message will be repeated to the caller.
Value Range
1–3 times
Feature Manual References
2.2.16 Custom Service
Wait for First Digit
Specifies the length of time that the VPS waits for the caller to dial the first digit after a Custom Service
menu is played for the caller. If this time expires, the No DTMF Operation setting determines how the
call is then handled. If this parameter is set to "0", No DTMF Input Operation handles the call
immediately after the menu is played for the caller.
Value Range
0 s–10 s
Feature Manual References
2.2.16 Custom Service
Maximum Number of Invalid Entry
Specifies the times an invalid password is entered before following "Entry Failure" setting.
Value Range
1–10 times
Feature Manual References
2.2.16 Custom Service
No DTMF Input Operation
Determines how calls are handled when callers do not dial any numbers in response to VPS guidance
(often because they are rotary telephone users). The default setting is "Operator", which allows the
caller to be automatically connected to an operator after the message is played.
Value Range
Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS (see "No DTMF Input Operation" in
"Menu & Transfer")
Feature Manual References
2.2.16 Custom Service
Entry Failure
Determines what operation is activated when a caller enters an invalid password X times. (X= the
value set for "Maximum Number of Invalid Entry")
To Next Page
Loading...
