4. The main window is displayed.
Note
• You can change the display language by clicking Utility®Set Language..., then selecting the
desired language and clicking OK.
• To confirm or change the parameters in the Set Default Parameters window after changing the
display language, click Utility®Default Parameters®Set Default.
5. Click Connect ® USB from the menu bar, or click Connect on the toolbar, select USB in the Connection
Mode dialogue box and click Next.
Note
• To connect to the VPS via USB, the KX-TVM USB driver must be installed on the PC, as explained
in 4.1 Installing KX-TVM Maintenance Console.
Document Version 2.1 2008/04 Getting Started 37
4.2 Starting KX-TVM Maintenance Console
To Next Page
Loading...
