Panasonic KX-TVM50 - Page 38

6. Enter the administrator password (default: 1234), then click Next.
Note
• The administrator password is required to access the VPS for programming. The System
Administrator can change the password (see "Password" in 2.8.1 Administrator in the
Programming Manual).
7. Click Finish when the message Connected! is displayed.
8. You may now begin programming the VPS. To choose the area you would like to begin programming, click
the desired icon in the Shortcuts menu.
Note
• To connect to the VPS via LAN, first connect to the VPS via USB and set the appropriate LAN settings.
Refer to 1.9.12 Utility—LAN Settings in the Programming Manual.
• To connect to the VPS via modem, refer to 1.5.4 Connect—Dial-up (Modem) (Optional) in the
Programming Manual.
• If programming the VPS for the first time, the Quick Setup utility can help you program essential settings
quickly and easily. See 4.3 Quick Setup for more information.
• KX-TVM Maintenance Console supports versions 1.0 and 2.0 of the KX-TVM50 and KX-TVM200. The
software performs according to the version number of the connected VPS.
• Software features, design, and system requirements are subject to change.
38 Getting Started Document Version 2.1 2008/04
4.2 Starting KX-TVM Maintenance Console