SR-DSV10739 - 14 -
# ## Motor Business Unit, Home Appliances Company, Panasonic
#
6-5# Front panel
*# Configuration of Front panel#
#
#
*# Rotary switch(RSW)
By manipulating the RSW+Pr.0.03(selection of stiffness at real-time auto-gain tuning) was corrected by setting the
RSW, and can be changed from the front panel gain control.
Example,-./0/123#
RSW setting
The stiffness
correction
Stiffness after
correction
LED Display
Parameter Pr0.03 is
changed
-4# 5/# 3# -6#
Possible#
78# 98# :# :#
7;# 9;# 8/# 8/#
71# 91# 88# 88#
7<# 9<# 8;# 8;#
7=# 9=# 81# 81#
7># 9># 8<# 8<#
7?# 9?# 8=# 8=#
@# 5/# 3# 3#
@?# "?# 8# 8#
@># "># ;# ;#
@=# "=# 1# 1#
@<# "<# <# <#
@1# "1# =# =#
@;# ";# ># >#
@8# "8# ?# ?#
Impossible#
#
*# Operation method
#
#
When power is turned on after the show check pattern, and displays the following normal.
If you operate the RSW, LED displays a real-time stiffness after adjustment for the RSW.
However, in the event that an alarm occurs, alarm codes (main and sub) display.
#
#
A
During warnings occur, the display will flash slowly.
#
A
When an error occurs, the display switches to cause an error with flashing numbers.
A
Rotary Switches is a length of 4mm and a width of 1mm ,so flat-blade screwdriver to set the rotary switch that is
less than 4mm in width and thickness of 1mm or less.
To Next Page
Loading...
