9. Menu Guide
230
∫ [Wi-Fi Function] (P256)
∫ [Wi-Fi Setup] (P298)
∫ [Bluetooth] (P260)
∫ [Remote Wakeup] (P266)
∫ [Returning from Sleep Mode] (P269)
∫ [Auto Transfer] (P271)
∫ [Location Logging] (P273)
∫ [Auto Clock Set] (P274)
∫ [Wi-Fi network settings]
Registers the Wi-Fi access point. (P293)
Wireless access points used to connect the camera to Wi-Fi networks will be registered
automatically.
This enables/disables the WIRELESS connection lamp.
If you select [OFF], they will not light/flash.
This allows you to set the electronic sound and the electronic shutter sound.
Settings: [Beep Volume]/[E-Shutter Vol]/[E-Shutter Tone]
[Wi-Fi]
[Bluetooth]
• Up to 17 wireless access points can be registered. If you try to register more than 17 access
points, the oldest registered access points will be deleted.
• Performing [Reset Network Settings] will delete registered wireless access points.
[Wireless Connection Lamp]
[Beep]
Not available in these cases:
• [Beep] is not available when [Silent Mode] is set to [ON].
To Next Page
Loading...
