10. Using the Wi-Fi/Bluetooth function
262
Use Wi-Fi to connect the camera and a smartphone that does not support Bluetooth Low
Energy.
• You can also connect via Wi-Fi to a smartphone that supports Bluetooth Low Energy by
following the same steps.
You can easily connect to the camera via Wi-Fi without entering a password on your
smartphone.
A SSID
• The information required for directly connecting your
smartphone to this unit (SSID) is displayed.
• You can also display the information by pressing [Wi-Fi] on the
camera.
1 Turn on the Wi-Fi function in the setup menu.
2 On the Wi-Fi setting screen, select the SSID displayed on
the camera.
3 Start “ Image App”.
• When the connection confirmation screen is displayed on the
camera, select [Yes] to connect. (For first time connection only)
Connecting to a Smartphone (Wi-Fi connection)
Connecting Without Entering a Password
On the camera
> [Setup] > [Wi-Fi] > [Wi-Fi Function] >
[New Connection] > [Remote Shooting &
View]
On your smartphone
At the time of purchase, [Wi-Fi Password] is set to [OFF].
Before connecting to a Wi-Fi network, ensure that the device displayed on the connection
confirmation screen is the one you actually want to connect to. When a wrong device is
displayed, if you select [Yes], the camera will automatically connect to that device.
We recommend that you set [Wi-Fi Password] (P298) to [ON] if, for example, there is
another Wi-Fi device nearby.
To Next Page
Loading...
