Panasonic Lumix DC-G95 User Manual

325
12. Others
Message Display
Meanings of main messages displayed on the camera screen, and response methods.
∫ Card
• It is a format that cannot be used with the camera.
Either insert another card, or back up any necessary data before formatting. (P33)
• Use a card compatible with the camera. (P32)
• Unable to access the card. Reinsert the card.
• Insert a different card.
• Failure to read or write data.
Turn off the camera, reinsert the card, and then turn it on again.
• The card may be broken.
• Insert a different card.
• Insufficient SD card write speed for motion picture, 4K photo, or Post-Focus recording.
Use an SD card of a supported Speed Class. (P32)
• If the recording stops even when you are using an SD card that meets the specified Speed
Class rating, the data writing speed of the SD card is getting slow.
We recommend backing up data, and formatting (P33).
• Depending on the type of card, recording may stop part way.
[Memory Card Error]/[Format this card?]
[Memory Card Error]/[This memory card cannot be used]
[Insert SD card again]/[Try another card]
[Read Error]/[Write Error]/[Please check the card]
[Recording was cancelled due to the limitation of the writing speed of the card]

Panasonic Lumix DC-G95 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Effective Pixels	20.3 MP
Image Processor	Venus Engine
Autofocus System	Contrast Detection AF
Shutter Speed	1/4000 to 60 sec
Continuous Shooting	9 fps
Built-in Flash	Yes
External Flash	Hot Shoe
Connectivity	Wi-Fi, Bluetooth
Battery	DMW-BLC12
Dimensions	130.4 x 93.5 x 77.4 mm
Weather Sealing	Yes
Sensor Size	17.3 x 13 mm
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder	Electronic, 2.36M dots
LCD Screen	3.0-inch Free-Angle Touchscreen, 1, 240k dots
Video Recording	4K/30p
Battery Life	Approx. 290 shots (CIPA standard)
Weight	536 g (with battery and SD card)
Image Sensor Format	Four Thirds
ISO Sensitivity	200-25600 (expandable to 100-25600)