Panasonic Lumix DC-G95 User Manual

10. Using the Wi-Fi/Bluetooth function
282
Sending images to AV device
You can send pictures and motion pictures to an AV device (home AV device) that
supports DLNA, such as a recorder.
1
Select the menu.
2
Select [Via Network] or [Direct], and connect. (P292, 293)
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
• To change the send setting, press [DISP.]. (P279)
A Wireless access point B Home AV device
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Send Images While Recording] or [Send Images Stored in the
Camera] > [AV device]
5
When [Send Images While Recording] has been selected
Take pictures. (P278)
When [Send Images Stored in the Camera] has been selected
Select the picture. (P279)
• Sending may fail depending on the operational status of the AV device. Also, sending may
take a while.
Not available in these cases:
• When [Auto Transfer] in [Bluetooth] is set to [ON], [Wi-Fi Function] is not available.
MENU

Panasonic Lumix DC-G95 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Effective Pixels	20.3 MP
Image Processor	Venus Engine
Autofocus System	Contrast Detection AF
Shutter Speed	1/4000 to 60 sec
Continuous Shooting	9 fps
Built-in Flash	Yes
External Flash	Hot Shoe
Connectivity	Wi-Fi, Bluetooth
Battery	DMW-BLC12
Dimensions	130.4 x 93.5 x 77.4 mm
Weather Sealing	Yes
Sensor Size	17.3 x 13 mm
Image Stabilization	5-axis sensor-shift image stabilization
Viewfinder	Electronic, 2.36M dots
LCD Screen	3.0-inch Free-Angle Touchscreen, 1, 240k dots
Video Recording	4K/30p
Battery Life	Approx. 290 shots (CIPA standard)
Weight	536 g (with battery and SD card)
Image Sensor Format	Four Thirds
ISO Sensitivity	200-25600 (expandable to 100-25600)