271
10. Using the Wi-Fi/Bluetooth function
The camera automatically transfers recorded images to a Bluetooth-connected
smartphone via Wi-Fi.
1 Make a Bluetooth connection to the smartphone. (P260)
2 Select the camera’s menu.
• If a confirmation screen is displayed on the camera asking you to terminate the Wi-Fi
connection, select [Yes] to terminate it.
3 On the smartphone, select [Yes] (Android devices) or [Wi-Fi Setup] (iOS
devices).
• The camera automatically makes a Wi-Fi connection.
– (iOS devices) Follow the on-screen message on the smartphone to change the
connected device on the Wi-Fi setup screen.
4 Check the send settings on the camera, and select [Set].
• To change the send setting, press [DISP.]. (P279)
• The camera will enter a mode where it can automatically transfer images and [ ] will be
displayed on the recording screen. (If it is not displayed, images cannot be transferred
automatically. Check the status of the Wi-Fi connection to the smartphone.)
5 Take pictures on the camera.
• Every time you take a picture, it is automatically sent to a specified device.
• While sending a file, [ ] is displayed on the recording screen.
∫ To stop the automatic transfer of images
Select [OFF] in step 2.
• A confirmation screen is displayed, asking you to terminate the Wi-Fi connection.
Transferring recorded images automatically
Wireless connectivity required:
> [Setup] > [Bluetooth] > [Auto Transfer] > [ON]
If you set [Auto Transfer] to [ON], the camera and the smartphone will be
connected via Wi-Fi/Bluetooth and automatic transfer will be enabled the next time
you turn on the camera and start “Image App” on the smartphone.
MENU
To Next Page
Loading...
