31
2. Getting Started/Basic Operations
∫ Card access indicators
Access indication
The access indication displays red when pictures are being recorded on
the card.
• Do not perform the operations below while the card is being accessed (while image data
is being written or read or deletion or formatting is in progress, for example).
These operations may damage the card or recorded data or cause the camera to stop
functioning correctly.
– Turning off the camera
– Removing the battery or card, or disconnect the AC adaptor (optional) and DC coupler
(optional)
– Exposing the camera to vibration, impact or static electricity
• If operation fails due to vibration, impact or static electricity, perform the operation
again.
To Next Page
Loading...
