Firmware Ver. 2.0
F-12
Recording of HDR (High Dynamic Range) motion pictures in HLG (Hybrid Log Gamma)
format is now supported. With this format, you can record bright images susceptible to
overexposure with more natural colours than is possible with conventional formats.
• “HLG” is a standardised HDR video format that converts and expands the dynamic range of
compressed high-luminance image data on a supported device.
• The monitor and viewfinder of the camera are not capable of displaying images in HLG format.
• HDR images appear darker on devices that do not support the HLG format.
You can record HDR motion pictures in HLG format by setting [Photo Style] to [Hybrid Log
Gamma].
1 Set the mode dial to [ ].
• [Hybrid Log Gamma] is available only when the camera is set to Creative Video Mode.
2 Select an item that supports [Hybrid Log Gamma].
• [AVCHD] and [MP4] do not support [Hybrid Log Gamma].
• When [Rec Format] is set to [MP4 HEVC], [Photo Style] is fixed to [Hybrid Log Gamma]. In
this case, you do not need to follow the procedure from Step
3 onwards.
• [Hybrid Log Gamma] is not available for 8 bit 4:2:0 motion picture.
• Items available for recording with a [Hybrid Log Gamma] are indicated as [HLG available]
on the screen.
3 Select the menu.
4 Press 2/1 to select [Hybrid Log Gamma] and then press [MENU/SET].
• [ ] is displayed on the recording screen.
• To output HDR images in 4K/60p (4K/50p) format via HDMI, select the following settings first,
and then select [Hybrid Log Gamma].
– [Rec Format]: [MP4 (LPCM)] or [MOV]
– [Rec Quality]: [4K/8bit/150M/60p] ([4K/8bit/150M/50p])
– [4K/60p Bit Mode] ([4K/50p Bit Mode]) in [HDMI Rec Output]: [4:2:2 10bit]
∫ About [Hybrid Log Gamma]
HDR motion pictures in HLG format can now be recorded
[Hybrid Log Gamma] has been added to [Photo Style]
> [Motion Picture] > [Rec Format]
> [Motion Picture] > [Rec Quality]
> [Motion Picture] > [Photo Style]
• The following picture quality settings cannot be adjusted.
– [Contrast]
• The following settings are fixed.
– [Luminance Level]: [64s940]
– [Highlight Shadow]: [ ] (Standard)
– [i.Dynamic]: [OFF]
• The lower limit of the ISO sensitivity is fixed to [ISO400].
MENU
MENU
To Next Page
Loading...
Need help?
General
