Panasonic Lumix DC-ZS80 Owner's Manual For Advanced Features

117
4K Photo and Drive Settings
Recording mode:
■
Setting [Burst Rate]
Select [Burst] and pressing in step
2
(→116)
Select the burst rate with , and press [MENU/SET]
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Speed (pictures/sec.)
[AFS] / [MF] 10
5 2
[AFF] / [AFC] 5
Live View during
burst recording
[AFS] / [MF] None
Available Available
[AFF] / [AFC] Available
Number of
recordable pictures
*
1
With RAW files 26 or more
Without RAW files 100 or more
*
1
When recording is performed under the test conditions specified by Panasonic.
Pictures can be taken until the card becomes full. However, the burst speed will become slower
halfway through the recording. The number of burst pictures is limited by the picture-taking
conditions and the type and/or status of the card used.
■
About the maximum number of pictures that can be taken continuously
When you press the shutter button halfway, the maximum
number of pictures you can take continuously will appear. You
can check the approximate number of pictures that can be
taken before the burst speed slows down.
Example: When 20 pictures can be taken: [r20]
• Once recording starts, the maximum number of pictures that can be taken continuously
will decrease. When [r0] appears, the burst speed will slow down.
• When [r99+] is displayed, you can take 100 or more pictures continuously.
■
To cancel the burst function
Press [
] button ( ), and then select [ ] ([Single]) or [ ]
Burst function

Panasonic Lumix DC-ZS80 Specifications

General

Brand	Panasonic
Model	Lumix DC-ZS80
Category	Digital Camera
Language	English