33
Basics
Basic Operation
[LVF] button (Recording pictures using the viewfinder)
1
Press [LVF] button
Eye Sensor
[LVF] button
You can switch between monitor display and Viewfinder display.
Automatic switching
between viewfinder and
monitor
*
Viewfinder display
*
Monitor display
*
When [Eye Sensor AF] in the [Custom] ([Focus / Release Shutter]) menu is set to [ON], the camera
adjusts the focus automatically as the eye sensor is activated. Even when [Eye Sensor AF] is set
and the camera automatically adjusts the focus, a beep will not sound.
■
Automatic switching between viewfinder and monitor
The eye sensor automatically switches the display to viewfinder when your eye or an
object moves close to the viewfinder. When the eye or object moves away from the
viewfinder, the camera returns to monitor display.
■
About diopter adjustment
Rotate the diopter adjustment dial to adjust until you are able
to clearly see the characters displayed in the viewfinder.
●
When you open the monitor, the display automatically switches to monitor display, and the
[LVF] button and eye sensor are disabled.
●
If [LVF Display Speed] is set to [ECO 30fps] when the viewfinder is used, the camera can be
operated for a longer period since battery drainage is reduced.
●
The eye sensor may react depending on the shape of your eyeglasses, the way you hold the
camera, or whether the eye sensor is exposed to strong light.
●
During motion picture playback or Slide Show, the eye sensor does not operate.
To Next Page
Loading...
Need help?
General
