220
Using Menu Functions
Menu list
[Sequence Composition]
Select multiple frames from a 4K burst file to create a sequence composition of a moving
subject into one picture.
→ [Playback] → [Sequence Composition]
1
Use to select the 4K burst files and press [MENU/SET]
2
Select frames to combine
Select the frames so that the moving subject will not overlap on the preceding or
subsequent frames. (The sequence composition may not be created properly if the
subject overlaps.)
Drag the slide bar or use to select the frames to combine
Press [MENU/SET]
• The selected frames are remembered, and the display goes to
the preview screen.
• Use
to select items and press [MENU/SET] to perform
the following operations.
– [Next]: Lets you select more frames for combining.
– [Reselect]: Discards the frame selected immediately before
and lets you select a different image.
Repeat steps - to select more frames to combine (from 3 to 40 frames)
Press to select [Save], and then press [MENU/SET]
Tips for [Sequence Composition]
We recommend using a tripod to take pictures for [Sequence Composition].
●
Pictures are saved in JPEG format. Recording information (Exif information) of the first frame such
as shutter speed, aperture, and ISO sensitivity are also registered.
To Next Page
Loading...
Need help?
General
