242
Wi-Fi/Bluetooth
Controlling with a Smartphone
■
Turning off the camera with the smartphone
Select [ ]
Select [ OFF]
●
When [Remote Wakeup] is set to [ON], the Bluetooth function continues to operate even after the
camera is turned off, thus causing the battery to drain.
Operating the shutter button of the camera using a
smartphone (remote recording)
Wireless connectivity required:
1
Connect to a smartphone (→237)
2
Operate the smartphone
If the camera is already connected to the smartphone via Bluetooth, select [ ] → [Remote
operation].
(iOS devices) Depending on the connection status of the smartphone, you may need to change the
connected device on the Wi-Fi setup screen. Follow the on-screen message on the smartphone to
change the setting.
Select [ ]
Take pictures
• The recorded images are saved in the camera.
• Some settings are not available.
■
Setting the higher priority between the camera and smartphone to perform
operations
→ [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [Priority of Remote Device]
[Camera]
Allows you to perform operations with both the camera and the smartphone.
• The camera’s dial settings, etc. cannot be changed with the smartphone.
[Smartphone]
Allows you to perform operations only with the smartphone during remote
recording.
• The camera’s dial can also be operated with the smartphone.
• To end remote recording, press any of the buttons on the camera to turn
on the screen, and select [Cancel].
• The setting of this function cannot be changed while the connection is active.
To Next Page
Loading...
Need help?
General
