121
4K Photo and Drive Settings
Recording with the 4K Photo function and selecting pictures to save
[4K Pre-Burst]
Press the shutter button fully
• The camera adjusts the focus continuously when using Auto Focus.
Except when in Manual Exposure Mode, it also adjusts the exposure
continuously.
• Images may not be displayed as smoothly as when recording with the
normal recording screen.
Approximately 1 second
Recording is performed
In situations where you want to lock focus and exposure, such as
when the subject is not at the center, use [AF/AE LOCK]. (→108)
• Burst pictures are saved as a single 4K burst file in the MP4 format.
• When [Auto Review] is enabled, the picture selection screen will be displayed automatically. To
continue recording, press the shutter button halfway to display the recording screen.
• For information on how to select and save pictures from 4K burst files, refer to (→122).
■
To cancel the 4K Photo functions
Press [
] button ( ), and then select [ ] ([Single]) or [ ]
Taking pictures of yourself (4K Selfie)
You can switch to 4K Photo Mode and take pictures of yourself. (→62)
• In Self Shot Mode, you can take pictures with [4K Burst (Wide-angle)], a setting that allows you to
include a wider background. (In modes other than Self Shot Mode, the setting will switch to
[4K Burst].)
Battery drainage and camera temperature
●
If the surrounding temperature is high or 4K photos are recorded continuously, [ ] may be
displayed and recording may be stopped halfway through. Wait until the camera cools down.
●
When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature rises.
(to protect itself, the camera may switch to [
] ([4K Burst]))
Select [
] ([4K Pre-Burst]) only when recording.
To Next Page
Loading...
Need help?
General
