195
Using Menu Functions
Menu list
→ [Custom] → [Monitor / Display]
[Expo.Meter]
You can display the exposure meter.
Exposure meter
●
When you set this function to [ON], an exposure meter is displayed
during Program Shift, aperture setting, and shutter speed setting.
●
Proper exposure is not possible in the range indicated in red.
●
If the exposure meter is not displayed, press the [DISP.] button to
switch the display of the monitor.
●
The exposure meter will turn off if no operation is performed for
approximately 4 seconds.
8.05.64.0
15 30 60 125 250
[MF Guide]
The MF guide is displayed during Manual Focus. You can
check whether the point of focus is to the near side or the far
side.
Indicator for (infinity)
[Rec Area]
Switching the angle of view setting used for recording still pictures and motion pictures.
Indicated as the angle of view when recording still pictures.
Indicated as the angle of view when recording motion pictures.
●
The recording area indicated is an approximation.
●
[Rec Area] is fixed to [ ] when recording 4K photos or recording in [Post Focus].
[Remaining Disp.]
Switching the display between the number of recordable pictures that you can take and
the available recording time.
[Menu Guide]
You can display the selection screen when the mode dial is switched to [ ]/[ ].
To Next Page
Loading...
Need help?
General
