Advanced (Recording pictures)
[REC] mode:
GJlDmm
Compensating the Exposure
Use
this function when you cannot achieve appropriate exposure
due
to the difference in
brightness between
the
subject and the background.
Look
at the following examples.
Underexposed
Properly
exposed
Overexposed
Compensate
the
exposure towards
positive.
Compensate
the exposure towards
negative.
o
Press.
[12] until [EXPOSURE] appears,
,
....
,
..
compensate the exposure with
....
/~.
• Select
[0
EV] to return to the original exposure.
Press [MENU/SET] to finish.
•
You
can also press the shutter button halfway to finish.
_Note
•
EV
is
an
abbreviation of [Exposure
Value).
It
refers
to
the amount of light given
to
the CCD
by
the aperture value and the shutter speed.
• The exposure compensation value appears
on
the lower left of the screen.
• The set exposure value
is
memorized even
if
the camera
is
turned
off.
• The compensation range of the exposure will
be
limited depending
on
the brightness of the
subject.
VQT1M97 45
To Next Page
Loading...
Need help?
General
