Preparation
SO
MemoryCard(8MBt02
GB)
(Formatted using the FAT12orFAT16
formalin
compliance with the SD
standard)
SDHC Memory Card (4
GB,8GB~
16
GB)*
(Formattedusingthe
FAT32
format in
compliance with the
SD
standard)
• Fast recording and writing speed
• Write-Protect switch
® provided (When
this switch
is
set to the [LOCK] position,
no further data writing, deletion or
formatting is possible. The ability to
write, delete and format data is restored
when the switch is returned to its
original position.)
MultiMediaCard • Still pictures only.
* The SDHC Memory Card is a memory card standard decided by the SD Association
in
2006
for high capacity memory cards more than 2 GB.
*
You
can use an SDHC Memory Card
in
equipment that is compatible with SDHC Memory
Cards however you cannot use
an
SDHC Memory Card
in
equipment that is only compatible
with SD Memory Cards. (Always read the operating instructions for the equipment being
used.)
•
You
can only use cards with SDHC logo (indicating compliance with the SD standard) if using
cards with 4 GB or more capacity.
• Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs
(This Site is English only.)
eNote
•
Do
not turn this unit off, remove its battery or card or disconnect the
AC
adaptor
(DMW-AC5PP; optional) when the access indication is lit [when pictures are being read
or deleted or the built-in memory or the card is being formatted (P25)]. Furthermore, do
not SUbject the camera to vibration or impact. The card or the data
on
the card may be
damaged, and this unit may no longer operate normally.
• The data on the built-in memory or the card may be damaged
or
lost due to electromagnetic
waves, static electricity or breakdown of the camera or the card. We recommend storing
important data on a
PC
etc.
• Do not format the card
on
your
PC
or other equipment. Format it
on
the camera only to ensure
proper operation. (P25)
• Keep the Memory Card out of reach of children to prevent swallowing.
:~:::~
J
We
recommend selecting [LANGUAGE] (P25) from the [SETUP] menu (P21) before
setting date/time.
• The clock is not set when the camera
is
shipped.
c··················
M
D Turn the camera on.
• The [PLEASE SET THE CLOCK] message appears.
(This message does not appear
in
[PLAYBACK]
mode.)
® [MENU/SET] button
® Cursor buttons
16 VQT1M97
To Next Page
Loading...
Need help?
General
