Connecting
to
other equipment
[PLAYBACK]
mode:
(g
...........................................-....- ............•......
Playing Back Pictures
on
a TV Screen
Preparations:
Set
the
[TV
ASPECT].
(P24)
Turn this unit
and
the
TV
off.
o Yellow: to the video input socket
e White: to the audio input socket
® Align the marks, and insert.
®
AV
cable (supplied)
• Check the directions of the connectors, and plug them straight
in
or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
Connect the
AV
cable (supplied) to the video input
and
the audio input
sockets
on
the
TV.
Connect the
AV
cable
to
the
[AV
OUn
socket
on
the camera.
Turn
the
TV
on
and
select
external
input.
Turn
the
camera
on.
flNote
• Depending on the [ASPECT RATIO], black bands may
be
displayed on the top and bottom or
the left and right of the pictures.
• Do not use any other
AV
cables except the supplied one.
• Read the operating instructions for the
TV.
• When you play back a picture vertically, it may be blurry.
•
You
can view pictures
on
TVs
in
other countries (regions) which use the NTSC or PAL system
when you set [VIDEO OUT]
in
the [SETUP] menu.
•
Even
if
you
set [VIDEO OUT]
to
[PAL),
the output signal will still
be
NTSC
in
the recording mode.
Still
pictures
recorded
on
an
SO
Memory
Card
can
be
played
back
on
a
TV
with
an
SO
Memory
Card
slot.
GNote
• Depending on the TV model, pictures may not be displayed on the full screen.
• Motion pictures cannot
be
played back.
To
play back motion pictures, connect the camera to the
TV with the
AV
cable (supplied).
•
You
cannot play back pictures on SDHC cards if the TV does not support these cards.
•
You
may not be able to play back MultiMediaCards.
VQT1M97 89
To Next Page
Loading...
Need help?
General
