Advanced (Recording pictures)
[REG] mode:
IIH!I
Taking pictures that match the scene being
recorded
(IDm:
Scene mode)
When
you select a scene mode to match the subject and recording situation,
the
camera
sets the optimal exposure and hue to obtain the desired picture.
nSlide the [REC]/[PLAYBACK] selector switch
to
[1fl1/0], and then
«'~<""'.
press [MODE].
........
""""1
Press
A/T
to select [SCENE MODE1]
or
[SCENE MODE2], and then
press [MENU/SET].
•
If
you
set the scene modes
you
use frequently
in
[SCENE MODE1] and
[SCENE MODE2],
you
can then select them immediately which
is
very convenient.
Press
..
/T
/
....
/~
to
select the scene mode.
•
You
can switch menu screens from any menu item
by
rotating
the zoom lever.
D Press [MENU/SET]
to
set.
• The menu screen is switched
to
the recording screen
in
the
selected scene mode.
•
About
the information 0
·If
you press [DISPLAY] when selecting a scene mode
in
step
3,
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
fiNote
•
To
change the scene mode, press [MENU/SET] and then press
~,
and return
to
step 3 above.
• Refer
to
P41
for information about the shutter speed.
• The scene mode flash setting
is
reset to the initial setting when the scene mode is changed.
• When
you
take a picture with a scene mode that
is
not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot
be
set
in
scene mode because the camera automatically adjusts
them
to
the optimal setting.
- [INTELLIGENT ISO]
- [SENSITIVITY]
- [COLOR MODE]
When
taking pictures of people outdoors during the daytime, this
mode
allows you to
improve the appearance of the persons
concerned
and make their skin tones look
healthier.
VQT1M97 47
To Next Page
Loading...
Need help?
General
