Advanced (Recording pictures)
• Birthday/Name
setting
1 Press
..
/T
to
select [AGE]
or
[NAME] and then
press
~.
2 Press
..
/T
to
select
[SEn
and then press [MENU/SET].
3 Enter the
birthday
or
name.
Nd.A
..•
ME
.,.
...
Birthday:
~/~:
Select the items (year/month/day).
"/T:
Setting. I
~£!~;~,"~.=.,".;,,=~
I
[MENU/SET]: Exit.
Name: For details
on
how to enter characters, read the [TITLE EDIT] section on P73.
- When the birthday or name is set, [AGE] or [NAME]
is
automatically set to [ON].
- If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4 Press [MENU/SET]
to
finish
.
• To cancel [AGE] and [NAME]
Select the [OFF] setting
in
step 2 of the "Birthday/Name setting" procedure.
ONate
-The
age and name can
be
printed out using the "PHOTOfunSTUDIO-viewer-" bundled software
on the CD-ROM (supplied).
-If
[AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not
be
displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
- The focus range becomes the same as macro mode.
[5
cm
(0.17 feet) (Wide)/50
cm
(1.64 feet)
(Tele)
to
00]
(DMC-FS5)/[5
cm
(0.17 feet) (Wide)/30
cm
(0.99 feet) (Tele) to
00]
(DMC-FS3)
- [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [IS0400].
- If the camera is turned
on
with
[BABY1
]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
- If the age
is
not properly displayed, check the clock and birthday settings.
- The birthday setting and name setting can
be
reset with [RESET].
- The initial setting for [AF MODE]
is
[~].
Select this when you want to take pictures of a pet such
as
a dog
or
a cat.
You
can set your pet's birthday and name.
You
can select to have these appear at the time
of playback,
or
have them stamped on the recorded image using
[TEXT
STAMP] (P74).
For information about [AGE] or [NAME), refer to [BABY1 ]/[BABY2] on P50.
8 Note
- The initial setting for the AF assist lamp
is
[OFF].
- [INTELLIGENT ISO]
is
activated, and maximum ISO sensitivity level becomes [IS0800].
- The initial setting for [AF MODE]
is
[~].
- Refer
to
[BABY1 ]/[BABY2] for other information about this mode.
Select this
when
you want to take pictures of sunset view. This allows you to take vivid
pictures of the red color of the sun.
flNote
-ISO
sensitivity is fixed to [IS01 00].
VQT1M97
51
To Next Page
Loading...
Need help?
General
