Connecting to a PC or Printer
117
VQT0R81
Connecting to a PC or Printer
Before Connecting to the PC or the Printer
[ : USB MODE]
Select the USB communication system
before connecting the camera to your PC or
your printer with the USB connection cable
(supplied).
Set the items on [USB MODE] in the
[SETUP] menu. (P24)
1 Select [USB MODE].
2 Select [PC] or [PictBridge (PTP)].
• If you connect the camera to a PC,
select [PC]. (P118)
• If you connect the camera to a printer
supporting PictBridge, select
[PictBridge (PTP)]. (P121)
• When [PC] is selected, the camera is
connected via USB Mass Storage
communication system.
• When [PictBridge (PTP)] is selected, the
camera is connected via PTP (Picture
Transfer Protocol) communication system.
PC
VIDEO OUT
SCENE MENU
HIGHLIGHT
USB MODE
OFF
NTSC
AUTO
EXIT
MENU
RESET
SELECT
SETUP
3
/
4
MENU
USB MODE
SELECT
SET
PictBridge
(
PTP
)
PC
MENU
To Next Page
Loading...
Need help?
General
