Recording pictures (advanced)
75
VQT0R81
[SCENE MODE] menu (Refer to P71 for information about how to select the menu.)
Select this mode when you want to take
pictures of baby. Exposure and hue are
adjusted to achieve a healthy complexion
on the baby. When the flash is used, the
light is weaker than usual.
• When playing back pictures, baby’s age
can be displayed.
• The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for connecting to a
PC.)
Age display setting
• If you want to display the age, set birthday
in advance, select [WITH AGE] and press
1.
• If you do not want to display the age,
select [WITHOUT AGE] and press 1.
Birthday setting
1 Select [BIRTHDAY SET.] and press 1.
2 When a message [PLEASE SET THE
BIRTHDAY OF THE BABY] appears,
select items (year, month and day) using
2/1, and set using 3/4.
3 Press the [MENU] button to finish the
setting.
• If you select [WITH AGE] without setting
birthday in advance, a message is
displayed. Press the [MENU] button, and
set birthday following the above steps 2
and 3.
• The ISO sensitivity is fixed to [AUTO].
• After turning on the camera in [BABY] or
switching to [BABY] from other modes, the
age and current date and time are
displayed for about 5 seconds at the
bottom of the screen.
• The age display style differs depending on
the language setting in the recording
mode.
• The date of birth is displayed as [0 month
0day].
• If the age is not properly displayed, check
the clock and birthday settings.
• If the camera is set to [WITHOUT AGE],
the age is not recorded even the time and
birthday are set. This means that the age
cannot be displayed even if you set the
camera to [WITH AGE] after taking
pictures.
• For resetting the birthday setting, use
[RESET] in the [SETUP] menu (P24).
Baby mode
10:00 DEC. 1.2005
9
months
10
days
BABY
WITHOUT AGE
MENU
MENU
SETSELECT
BIRTHDAY SET.
WITH AGE
5
To Next Page
Loading...
Need help?
General
