Preparation
17
VQT0R81
Removing the Lens Cap/Attaching the Strap
∫ Remove the lens cap
1 Pinch the lens cap and remove it.
• When you turn the camera off, carry the
camera or play back the pictures, attach
the lens cap to protect the surface of the
lens.
• Detach the lens cap before taking
pictures.
• Be careful not to lose the lens cap.
∫ Attaching the strap (supplied)
1 Pass the strap through the hole at
the Strap Eyelet.
2 Pass the strap through the
stopper and fasten the strap.
A: Pull the strap 2 cm or more.
• Attach the strap to the other side of the
camera being careful not to twist it.
• Check that the strap is firmly attached to
the camera.
• Attach the strap so that you can see
“L
UMIX” logo.
To Next Page
Loading...
Need help?
General
