Preparation
21
VQT0R81
About the Setup Menu
• Set the items if necessary. (Refer to
P22–24 for each menu item.)
1 Turn the camera on.
• The menu items depend on the mode
selected with the mode dial (P36). In
this page, the setup menu
[MONITOR] settings in program AE
mode [ ] are shown as an
example.
2 Press the [MENU] button.
3 Select the [SETUP] Menu.
• Rotate the front dial A to switch
between pages 1/4, 2/4, 3/4 and 4/4.
4 Select the desired item.
5 Select the desired value.
• Close the menu by pressing the
[MENU] button after finishing the
setting. In recording mode, you can also
close the menu by pressing the shutter
button halfway.
OFF ON
AUTO
AUTO
8
M
SENSITIVITY
PICT.SIZE
QUALITY
W.BALANCE
ASPECT RATIO
SETUP
SELECT
MENU
REC
1
/
3
EXIT
MENU
1SEC.
n
0
OFF
2MIN.
MF1
AUTO REVIEW
POWER SAVE
MF ASSIST
MONITOR
PLAY ON LCD
REC
SELECT
MENU
EXIT
SETUP
1
/
4
Be sure to press 1 at the end to
store the setting.
SELECT
EXIT
MENU
SET
SETUP
1
/
4
AUTO REVIEW
MONITOR
POWER SAVE
MF ASSIST
PLAY ON LCD
SELECT
EXIT
MENU
SET
SETUP
1
/
4
AUTO REVIEW
MONITOR
POWER SAVE
MF ASSIST
PLAY ON LCD
To Next Page
Loading...
