Recording pictures (basic)
58
VQT0R81
• The ways to control the exposure and the
white balance vary depending on the burst
mode setting. When the burst speed is set
to [ ], they are fixed to the values set
for the first picture. When the burst speed
is set to [ ] or [ ], they are adjusted
each time you take a picture.
• When setting the burst mode, the auto
review function is activated regardless of
the setting on the auto review function.
(The picture is not enlarged.) Moreover,
the settings for the auto review function on
the [SETUP] menu are disabled.
• Burst mode is not canceled when the
camera is switched off.
• Burst mode will not perform as described
if a MultiMediaCard is used in place of an
SD Memory Card. The reading/writing
speed of a MultiMediaCard is slower than
that of an SD Memory Card.
To Next Page
Loading...
Need help?
General
