Recording Menu Settings
89
VQT0R81
∫ Selecting the AF area
When selecting 1-area-focusing or
1-area-focusing (High speed), the AF area
can be selected as shown in the following
figure. When using spot-focusing you can
also move the spot metering target to
match the AF area.
1 Set the Focus switch to [AF] or
[AF MACRO].
2 Press the [FOCUS] button.
3 While pressing the [FOCUS] button, use
3/4/2/1 to move the AF area.
4 Release the [FOCUS] button to set.
• The following operations will return the AF
area to the previous one
– Setting the mode dial to auto mode
[].
– Turning the camera off.
• When using the digital zoom or when you
take pictures in dark places, the AF area
is displayed on the center of the screen
with a size wider than usual.
• When multiple AF areas (max. 9 areas)
light at the same time, the camera is
focusing on all the AF areas.
The focus position is not predetermined
because it is set to the position that the
camera automatically determines at the
time of focusing. If you want to determine
the focus position to take pictures, switch
the AF mode to 1-area-focusing mode or
Spot-focusing mode.
FOCUS FOCUS
FOCUS
1/60F5.0
PROGRAM SHIFT
To Next Page
Loading...
Need help?
General
