Application (Record)
Entering Text
VQT5B87- 139 -
Use the cursor button to enter names with the Face Recognition function and in Scene
Modes [Baby] and [Pet], or to register locations in [Travel Date] etc.
Press to select characters
Press [MENU/SET] several times until the desired character is
displayed
Cursor position
Text is inserted at the cursor position.
• To change the character type
→ Select , and press [MENU/SET].
■
To continue entering characters
• Press
to select and then press [MENU/SET]
• Move the zoom lever toward T side
• Turn the rear dial to the right
■
Editing text
Press to select and then press [MENU/SET]. Then, move the
cursor to the text to edit
• You can also move the cursor position by rotating the zoom lever or rear dial.
Press to select [Delete] and then press [MENU/SET]
Press to select the correct text, and then press [MENU/SET]
When you are finished entering text, press to select
[Set] and press [MENU/SET]
●
A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [Face Recog.])
*
A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (Maximum of
6 characters when setting names in [Face Recog.]).
To Next Page
Loading...
