Application (Record)
Using the [Rec] menu
VQT5B87
- 145 -
• For the setting procedures of the menu. (→57)
[ISO Limit Set]
You can set the upper limit of ISO Sensitivity when [Sensitivity] is set to [AUTO] or [ ].
■
Settings: [AUTO] / [200] / [400] / [800] / [1600] / [3200]
●
This function is disabled during motion picture recording. (Except [Creative Video
Mode])
●
Setting items below will be selectable in Creative Video Mode.
[AUTO] / [200] / [400] / [800] / [1600] / [3200] / [6400]
[ISO Increments]
You can adjust the ISO sensitivity settings for every 1/3 EV.
■
Settings
Settings Description of settings
[1/3EV]
[100], [125], [160], [200], [250], [320], [400], [500], [640], [800], [1000], [1250],
[1600], [2000], [2500], [3200], [4000]
*
, [5000]
*
, [6400]
*
[1EV]
[100], [200], [400], [800], [1600], [3200], [6400]
*
*
Only in [Creative Video Mode]
●
When the setting is changed from [1/3EV] to [1EV], ISO sensitivity will be set to value
closest to the value set during the [1/3EV]. (Set value will not restore when the setting
is changed back to [1/3EV]. It will stay as the setting selected for [1EV].)
To Next Page
Loading...
