Basics
Using the [Setup] menu
VQT5B87
- 66 -
• For the setting procedures of the menu. (→57)
[Video Rec Area]
Enables verification of the recordable area for a motion
picture before recording.
■
Settings: [ON] / [OFF]
●
Recordable area displayed for motion pictures should be interpreted as a guideline.
●
Recording area display may disappear when zooming to Tele depending on the
picture size setting.
●
For [Intelligent Auto] Mode, the setting is fixed to [OFF].
[Remaining Disp.]
Switch the display between the remaining number of still pictures you can take or the
remaining recording time of a motion picture that you can record for the available card or
built-in memory.
■
Settings
Displays the number of pictures that can be recorded.
Displays the remaining recording time.
[Highlight]
You can set overexposed areas (areas that are too bright and where there are no shades
of grey) to flash on the screen when the [Auto Review] function is activated or during
playback.
■
Settings: [ON] / [OFF]
●
To reduce overexposed areas, record a picture by setting negative exposure
compensation using the histogram display and so on as a reference. (→82) (The right
edge of the histogram shows the overexposed portion.)
●
This feature is disabled during Multi Playback, [Calendar], Playback Zoom, motion
picture playback or automatic scrolling playback of panorama pictures.
●
If the subject is too close to the camera when recording using flash, overexposure
may occur.
To Next Page
Loading...
