Preparations
Attaching the Lens Cap/Shoulder Strap
VQT5B87
- 16 -
Attaching the Shoulder Strap
We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
Pass the shoulder strap through the hole
at the shoulder strap eyelet
• Attach the shoulder strap so that the “LUMIX” Logo is
on the outside.
Pass the shoulder strap through the
stopper and fasten the shoulder strap
• Attach the shoulder strap to the other side of the
camera being careful not to twist it.
Pull the shoulder strap 2 cm
(0.066 feet) or more.
●
Make sure that the shoulder strap does not come loose.
To Next Page
Loading...
